Random good picture Not show

61. Electromigration in metal thin film interconnection is one of the important problems for VLSI reliability.

62. Microdevice based on SMA thin film was fabricated, and its deformation behavior was analyzed.

63. The electroluminescent characteristics are measured of the organic thin film device using TPD as the hole transporting layer and 8-hydroxyquinoline zinc as the emitting layer.

64. Preparation of thermal sensitive thin film resistor is one of key technologies in uncooled micro bolometer IR FPA fabrication.

65. In order to prevent corrosion of gear reducer surface and bedplate surface occurring during operation after installation, apply a uniform thin film of MoS2 lubricating grease to bedplate surface.

66. Thin film transistor ( TFT ) is one type of field effect transistors ( FET ).

67. Semiconductor bridge (SCB) was utilized to ignite energetic materials with thin film discharge and characterized of low input energy, high safety and logic control possibility.

68. At present, the study of SnO2 is focused on SnO2 thin film prepared by experiment and analysis of SnO2 thin film resistance changes through gas adsorption at the surface in the film.

69. This paper presents the basic design principle(sentencedict.com), the assembly and the application of several components of optical thin film used for meteorological satellite.

70. Theanalysis on the temperature stability of center wavelength for the thin film interleaver with multicavity by Takahashi model is presented.

71. Pulse compressed gratings (PCG) used in chirped-pulse amplification system and based on multi-layer thin film stack are etched with ion-beam and holographic techniques.

72. The data of the time resolved fluorescent spectra and fluorescent life time of an organic optical disk named the azo dye doped thin film are given.

73. There are many kinds of electronic nose(EN). IMS, amplifying chromophore quenching, fiber-optic sensor, MIME-type chemical sensor, polymer thin film, SAW sensor, MEMS are described.

74. The paper had mainly described the theoretical principle, arithmetic process and implementation of GA. Besides, GA had been programmed in the MATLAB6.5.1 for optimal design of optical thin film.

75. The lead titanate thin film has been prepared by the metal-organic decomposition(MOD)method.

76. Characteristic of ferroelectric storage element has be en introduced in this paper. A few main preparation methods of information function thin film have been recommended. We present its use field.

77. The magnetic properties of the thin film are excellent for perpendicular magnetic recording medium.

78. The second part briefly introduces the impacts of different plasma sources and hot wire CVD (HWCVD), in which no plasma involved, on the thin film silicon growth.

79. The reason why tungsten wire is easy to break in the silicon thin film deposition process by hot wire deposition method was explained.

80. The LiTaO3 thin film was chosen as infrared sensing film and prepared by a sol-gel process using lithium acetate and tantalum ethoxide as starting materials.

81. ZnO thin film with good quality was grown by metal organic chemical vapor deposition (MOCVD).

82. The thin film packing, equipped with a chopstick clamper and an automatic stopping, features embossing, three-sided sealing, cutting, automatic counting and tiding up.

83. This paper briefly introduces photothermal techniques and their applications in optical thin film coating measurements and Ti:sapphire laser crystal characterisation.

84. Thin film manganin gages and ytterbium gages were fabricated by magnetron sputtering.

85. Diffusion behavior of adatom and ad-dimer is one of the main researching object in the field of thin film physics.

86. It is discussed the phase changes of light wave in the situation of the thin film interference and on a reflecting surface in this paper.

87. Under the diffused light in the morning and afternoon, when silicon cells cannot power, thin film cells can still power.

88. The preparation of lead titanate thin film is briefly introduced and the merits of sol-gel method compared with other methods are analyzed.

89. The results of field tests and economic data of two important techniques, cyclic steam injection with addition of TFSA (thin film spreading agents) and foam steam flooding, are described in detail.

90. A novel technique - anodic vacuum arc coating for thin film deposition is reviewed in this paper.